biến game XBLA Demo thành Full

antonntminh · 8/12/09

tình hình là mấy bữa nay mình có đọc tin về việc có thể biến game XBLA bản demo thành full, hôm nay thì thấy trên abgx đã up vài game XBLA như Castle Crasher, Splosion Man, Shadow Complex... lên database của nó rồi,
nhưng mà hiện tại vẫn khá mù mịt về vụ này, có bạn nào năm rõ thông tin về việc biến game demo thanh full này thì có thể nói rõ cho mình biết được không?

NFP của Splosion Man:

No111 · 9/12/09

Region: North America Publisher: Dark Energy Digital Genre: Sports Size: 11x15mb Notes: This is the full game, for use on hacked XBox 360s (using your favorite patched dash method, FreeBOOT, XBReboot, etc) This will NOT work on a standard XBox360 and could get you flagged for ban if you attempt using it Installation Notes: Extract contents, copy top folder to HDD using your favorite HDD tool to the following location: Partition 3 / Content / 0000000000000000 Boot to patched dash, goto Game Library, and enjoy!
Click to expand...

Hiện đã có link download và đây là cách chính xác để thực hiện, nhưng hình như vẫn còn bị phân vùng :(

Sonix · 9/12/09

Dành cho các máy 360 đã mod chip (Free60 modded 360 or xài Cygnos360v2). Các máy xbox 360 bình thường, hack = cách đổi fw ổ đĩa sẽ ko xài đc mấy file này.

No111 · 10/12/09

Đây là cách để cài XBReboot. Đọc xong hoa cả mắt, nhức đầu.

This is a compilation of all information I could find throughout the Web. All information is thanks to it original creators. Such as tmbinc, Tiros, Ruley, Sandungas, Phoney, Tony Bologna, kote aka logi, and anyone else I have missed.

Before you even Start go to system settings -> Console setting -> Highlight System Info but dont click A. On the Right it will show your DashBoard. If its 2.0.8XXX.0 (X being any number) Then currently you cannot do this.

Reading Nand:

Requirements

First of all, you'll need soldering skills?if you've never used a iron before, you honestly should train on a different, less expensive object. This won't be much harder than adding a modchip to a console anyway.

You'll also need the following things:

At least one 32-bit PC and an LPT (parallel) port

More PCs with different mainboards are helpful since on some boards parallel ports were neglected in development due to the increasing success of USB. Therefore quite old boards SEEM to work better. Someone even used an old 386 for this hack.

With NANDPro2 (we'll talk later about this) comes a driver for 32-bit systems only port95nt.exe. There is a 64-bit port on the Internet, but no one has proven that it works with NandPro2 . Since many 64-bit systems don't even have a parallel port, this shouldn't bother too many people.

Windows 95 or better

Sorry, that doesn't mean Linux yet. It even seems to work with Windows Vista 32-bit and Windows 7 32-bit, but you might need to turn on Windows XP Compatibility Mode and run it with administrator rights. But there aren't many reports on that yet. However, you should prefer a XP or worse (earlier) system: XP, 2000(?), Me, 98, or 95.

An old LPT cable no-one will miss

Openable plug housings with screws/clips will make your life easier. Alternatively, use a bare DB25 male connector and wire.

As already mentioned: Soldering skills, tools and so on...

3× diode BAT41 Or 1N4148

There are several diodes you can use. People on xboxhacker.net had the best experiences with BAT41.

5 × 100?120 Ω resistors

*not a must-have, but it'll protect your box

30 AWG Wire

Voltmeter and continuity tester

NandPro2.0b by Tiros http://www.megaupload.com/?d=MBIFUWUU

XBRebooter bin for you motherboard

Xenon: http://www.megaupload.com/?d=UCZSAZX4
Xenon 1921: http://www.megaupload.com/?d=JVW65QXY
Zephyr: http://www.megaupload.com/?d=YSNUB59N
Falcon: http://www.megaupload.com/?d=JDBEW8KK
Jasper: http://www.megaupload.com/?d=0T9OM30J

Place this file in the same directory as NandPro and rename to XBR.bin

Hex Workshop: http://www.megaupload.com/?d=3VUUGC9B
360 Flash Tool: http://www.megaupload.com/?d=SS8SXW0X
Degraded 1.1: http://www.megaupload.com/?d=Y8065XV5

Step 1: Preparing the cable

For this step we will use a standard LPT cable. There is a mod using a db25 connector and Cat5 cable but for this guide we will just be using the LPT cable.

First cut off the female end. So you will get a cable with a DB25 connector at one side and loose wires on the other side.

Now you need to trace the wires in the cable. If you've got a cable with openable plug housings, you're in luck: just open the housings and compare single wires with those on the loose end. Otherwise it's time for your continuity tester. You will need to know which wire goes to which pin at the end. Write down the colour of the wire attached to each pin. Since there are only seven needed wires, you don't have to trace every wire. The following pins need to be connected: 1, 2, 11, 14, 16, 17, 18. In case a pin isn't connected, just resolder a wire from an unneeded pin (e.g., 15) to the needed one (e.g., 14).

After you've done that, you can cut the unneeded wires at the loose end so they won't bother you while soldering. Strip a small amount of insulation (5 mm should be plenty) from the end of each of the other wires, and twist the loose strands inside together. Tin each wire, so that you get nice and sweet clean wires.

Step 2: Preparing the board and Soldering everything

After opening your box and removing the DVD-ROM drive, fan shroud, etc., you should have a clear view of the board. Now it's time to locate the solder pads of J1D2 (red) and J2B1 (blue).

You will have to establish the following connections:

"Component" means that you will have to add the resistor or diode between those two points. I suggest that you first solder the component on the board and after that the wire to the component. The diode's black ring has to be in the direction of the Xbox board. By "screwhole", we mean a screwhole. (The ground (or "earth") connection we're using is also present on J1D2.6 and J2B1.12, but those are difficult to solder.) Solder the wire from DB25.18 to one of those big reddish rings (where the long screws go through the DVD-ROM drive legs), and fix it with insulation tape (NOT DUCT TAPE! Otherwise you will damage your Xbox). It is important that you solder the diode directly to the board. It won't work if it's in the plug housing!

This is how you count on a board:

The square is always 1, in this case J2B1.1. Also, notice the white dot near pin 1 and the labels near pins 2, 12, and 13.

Another diagram (including LPT & JTAG connections) LPT will be same for all boards but JTAG will vary for the different board revisions.

Step 3: Checking everything

Checklist:

* Is every wire connected to the correct pin?
* Are there any short circuits or doubly connected wires?
* Have you taken everything out of the box that doesn't belong in there?

When you've checked that, plug the parallel cable into your turned-off computer, the power supply into your Xbox, and the power cable into the power outlet.

Step 4: Setting up your PC

Turn on your PC. It's possible that your Xbox will turn on, too. Don't worry, just leave it turned on. As long as it doesn't start to smoke, smell, or anything else weird it will be fine. Later on, it should turn off the fans on its own, but the LEDs will remain blinking. If it doesn't turn on: don't worry, it doesn't have to be turned on while reading the NAND.

Go to the BIOS settings and search for LPT mode settings. Tiros recommends SPP/Normal mode in his help file (Nandpro.txt), but the mode doesn't actually appear to matter. If you're having trouble in the next step, give a different mode a try. After you have done that, save settings and leave BIOS. Boot up Windows.

Now the time has come to unpack NandPro2. In the archive you'll find port95nt.exe (driver) and some other files (e.g. NandPro.exe). Install the driver. If you're using Vista or higher, you might have to turn on XP Compatibility Mode, as already mentioned. To install it, just double-click on it and walk through the setup. There shouldn't be any error messages. Then: reboot.

Step 5: Reading/Dumping the nand.

Open up Windows Command Prompt (press Windows Key + R to open up Run. Type cmd and press Enter).

Navigate to NandPro's installation directory by using common commands (cd, dir, and the TAB key for auto-completion).

Then type nandpro.exe lpt: -r16 nand1.bin and press enter. If everything's fine, it should output this:

Testing LPT device address:0378 - address can differ
Using LPT device at address:0378 - address can differ
FlashConfig:01198010 - must be the same
Starting Block:0x000000
Ending Block:0x0003FF

Starting and ending should be as shown here if you want to read the whole flash.

Press any key to continue. It should start to count up addresses. If it starts to output stuff like "Error 0 .. blah blah" something's wrong. Recheck wiring, change LPT mode, or try a different computer. It is possible that there are one or two bad blocks on your NAND (error 25x), so don't worry if you get that error once or twice.

Well, the reading (dumping) process will take about half an hour. Unfortunately, we will need at least two dumps to check whether there are really no failures in your dump. So once NandPro has finished dumping, press the up arrow key (or retype the command), CHANGE THE FILENAME TO NAND2.BIN, press Enter, and dump it a second time.

When NandPro2 has finished the second dump without errors, you can either make a third or close the command-line.

Step 6: Checking for errors

First, open up the files with 360 Flash Tool. If it looks like in the picture beneath this, everything should be fine. If an error message "Couldn't open file" pops up, something went wrong.

Check with Hex workshop
Start up Hex Workshop. Choose tools -> Compare -> Compare Files. A new window will open. Select both files and click on OK. If they are identical you are done with this.

If not, search for errors in wiring etc. or try a different PC.

While 360 Flash Tool will show you the content of the NAND, it's not a conclusive check whether the integrity is good: it's possible to get a "thumbs up" from the utility even if you have corrupted (and more importantly, vital) blocks. A much better check is to run the resulted image through Degraded v1.1, which will highlight any errors.

Check with Degraded
Run Degraded and click settings, enter DD88AD0C9ED669E7B56794FB68563EFA.
After you set the key click Valid next to it and set the File System Start to 39. Click ok.
Open orig.bin
If you get, cannot read file , you must edit the orig.bin file.
Make a copy of it, origcopy.bin and open it up in your hex editor. At offset 0x0012 , you will see 2004 - 2007 Microsoft Corporation...
Change it to : 2004 - 2005 Microsoft Corporation and it will open with Degraded.

If your NAND has bad blocks it will looks like this:

Note in this example that the bad block information has been located elsewhere, so you *should* be okay. Even so, it's advisable to run a second dump through the utility and see whether this has a bad block (and relocated) in the exact same address.

A good NAND dump might look like this:

If you get this your NAND dump is about as good as it's gonna be. Now after all this work you can only now be sure it is even exploitable. Check which version of CB you have.

Exploitable CB versions:
1888, 1902, 1903, 1920,1921: exploitable xenon
4558: exploitable Zephyr
5761, 5766, 5770: exploitable falcon
6712, 6723: exploitable jasper

NON-Exploitable CB Versions: (CD = 8453 for all of them)

Xenon: 1922, 1923, 1940
Zephyr: 4571, 4572, 4578, 4579
Falcon/Opus: 5771
Jasper: 6750

Disconnect LPT from computer. If you CB is exploitable continue to JTAG installation.

Installing JTAG Hack

This mod allows for the writing to the NAND
There are several Variations for the JTAG depending on which motherboard you have.
Requirements:

2- Diodes
30awg wire

Xenon:

Falcon, Zephyr, Opus & Jasper:

All the diodes used are "switching diodes". Some that are know to work are: BAT41 1N4148 or 1N4153

Creating/Writing patched XBRebooter

Now connect LPT to computer and turn it on. There is no need to turn on xbox now either.
Open command prompt (Windows + R. type CMD hit enter)
Navigate to your NandPro directory.

Step 1) Extract KV and Config blocks from orig.bin
Type these commands into command prompt:
nandpro orig.bin: -r16 rawkv.bin 1 1
nandpro orig.bin: -r16 rawconfig.bin 3de 2

You can also do this 2 times and compare with Hex Workshop to ensure a good dump. Just the second time use
nandpro orig.bin: -r16 rawkv2.bin 1 1
nandpro orig.bin: -r16 rawconfig2.bin 3de 2

Step 2) Inject those blocks into XBR.bin
nandpro XBR.bin: -w16 rawkv.bin 1 1
nandpro XBR.bin: -w16 rawconfig.bin 3de 2

Step 3) Flash Your Custom Patched XBRebooter
nandpro lpt: -w16 XBR.bin

Then you need to do a "True" power cycle. in-order to do this you must unplug the Xbox 360 and wait 5-10 minutes for all volitale memory to be erased. This prevents conflicts from corrupting the newly written NAND.

If you have any problems it may be due to Bad blocks if you had any. If so you can try this program.
Redline99 released a small tool to remap bad blocks in an XBReboot image to match with your NAND chip, this could solve issues some people had trying to make XBReboot work:

Quote:
This is a small tool that will remap bad blocks in a full 16mb "zeropaired" (xbreboot) nand image. It looks at the original Microsoft backup (that you should have) and figures out from the spare area the remapped bad blocks. You can also enter the block id's into the textbox. It does not modify the original MS image, but it does modify the zeropaired image. Run the app only one time, be sure to make a backup beforhand.

This app has had ZERO testing, If anything comes up I'll try and fix it, but I need some feedback.
This is only for 16mb images, non jasper.
http://www.megaupload.com/?d=VMV1FTYC
Click to expand...

source: xbox360iso.com

ItsmeAj · 10/12/09

Sắp tới xbox 360 sẽ chia ra làm 2 nhánh rẽ:
bài
1. Theo cách hack firmware ổ DVD hiện tại và chơi Xbox live.

2. Theo cách hack dùng modchip như bài leo nguyen đề cập để chạy các homebrew như xboxclassic ngày trước - cài game vào HDD nào cũng đc, chạy game ko cần đĩa, chạy giả lập các hệ máy khácv.v..Tuy nhiên có thể sẽ ko còn cày gamescore và xác định là chia tay Xbox live sau khi cài homebrew là vừa.. chỉ thích hợp cho những ai đã bị ban máy, những ai ko có hứng thú cày gamescore v.v.. tóm lại là sau 1 thời gian nữa, mọi người sẽ chứng kiến xbox 360 bị hack tưng bừng bởi nhiều cách hack khác nhau.. mọi chuyện đã bị đẩy đi quá xa sau đợt ban vừa rồi.

Holy_Master · 10/12/09

thế máy hack modchip có chơi được game hệ khác ko?

Atachi · 10/12/09

Holy_Master nói: ↑

thế máy hack modchip có chơi được game hệ khác ko?
Click to expand...

Đọc được thì chơi được game hệ khác, load ISO từ HDD ko cần đĩa active vv..vv

antonntminh · 10/12/09

sao mình thấy nhiều bạn quan trong vụ region của game nhỉ, game hệ PAL hay NTSC thì nó cũng được ra gần cùng lúc thôi mà, trừ mấy game của Nhật thì còn hiếm, nhưng đa số nó cũng chỉ toàn tiếng nhật, chơi được bao nhiêu lắm?

Atachi · 10/12/09

antonntminh nói: ↑

sao mình thấy nhiều bạn quan trong vụ region của game nhỉ, game hệ PAL hay NTSC thì nó cũng được ra gần cùng lúc thôi mà, trừ mấy game của Nhật thì còn hiếm, nhưng đa số nó cũng chỉ toàn tiếng nhật, chơi được bao nhiêu lắm?
Click to expand...

Có vài game hệ máy Asia ban đầu nó ra bản Nhật trước, sau mới ra bản tiếng Anh hoặc có khả năng là ko ra luôn trong khi có thể máy hệ US có. Vấn đề cần chỉ là chơi mấy game này

kidofbaby · 10/12/09

điển hình là FF13... thậm chí ko có hệ Asia còn ko có nổi 1 bản tiếng Nhật

giâctzuhau · 10/12/09

chưa chắc
nếu nó thành công ở thị trường phương tây thì 1 bản cho asia là hoàn toàn có thể .
đây là SE, gã làm tiền chứ ko phải là SONY cần thương hiệu

tmriddle · 14/12/09

kidofbaby nói: ↑

điển hình là FF13... thậm chí ko có hệ Asia còn ko có nổi 1 bản tiếng Nhật
Click to expand...

FF 13 bản cho xbox 360 ko có cho hệ asia ah? Mình đọc tin thấy nó ra mắt phiên bản tiếng Anh ngày 9/3/2010, tại EU, Mỹ, Australia. Vậy bọn Úc nó chơi máy hệ j? Mình nghĩ chắc asia chứ

snakie31089 · 14/12/09

tmriddle nói: ↑

FF 13 bản cho xbox 360 ko có cho hệ asia ah? Mình đọc tin thấy nó ra mắt phiên bản tiếng Anh ngày 9/3/2010, tại EU, Mỹ, Australia. Vậy bọn Úc nó chơi máy hệ j? Mình nghĩ chắc asia chứ
Click to expand...

Úc nó chơi bản PAL bạn ạ.chính ra mua cái máy US lại hay, game yên tâm Eng, ko có đĩa đúc thì source down cũng dồi dào. Nhiều khi đĩa burn ngon hơn đĩa đúc nữa chứ

Atachi · 14/12/09

Xài đĩa Verbatim thấy chạy ngon lành cành đào, mỗi cái ko có cover đẹp :)

DuyLinh · 15/12/09

nhưng Xbox US bây giờ khá khó mua trừ khi có người quen xách tay về chứ thấy các cửa hàng cũng ít khi bán hệ US:(

antonntminh · 15/12/09

vậy ra máy ở VN đa số là hệ NTSC-J àh

S.W.A.T · 15/12/09

^: đúng vậy:)
1 khi đã có nhiều cách hack với nhiều điểm lợi và bất lợi khác nhau vậy thì mỗi người cũng nên xác định cho mình 1 hướng chơi game đi là vừa.
cá nhân tớ thấy việc chơi bx live = cách hack hiện tại đã ko còn an toàn 100% nữa( dù chưa chơi live bao giờ, lên cũng chết) vả lại sở thích là chơi offline nên nếu hack mod chip phổ biến, tớ sẽ đi theo hướng này. còn live àh: PC hoặc PS3 cho an toàn tuyệt đối, bản thân cũng ko thích kiểu chơi trong lo sợ, ko biết khi nào bị lên dĩa.

vaan009 · 15/12/09

Mún Live an toàn thì mua 1 con Xbox360 ko hack rồi mua game gốc về chơi,nói thật chơi onl thì mạng Xbox Live là tuyệt nhất!

ItsmeAj · 15/12/09

Chơi trò 2 ổ DVD =) 100% an toàn trên Xbox live mà vẫn chơi offline đc game copy. Chỉ hơi tốn tiền vào đĩa gốc để online thôi.

aeon1994 · 15/12/09

Vậy cho em hỏi nếu có thể hack theo nhánh 2 thi` giá cả sẽ thế nào ạ ?

Đăng nhập

biến game XBLA Demo thành Full

antonntminh Mr & Ms Pac-Man

No111 T.E.T.Я.I.S

Sonix ♫ VGM Collector ♫ Lão Làng GVN

No111 T.E.T.Я.I.S

ItsmeAj snake, snake, snaaaake

Holy_Master The Warrior of Light Lão Làng GVN

Atachi The Boy From Nowhere

antonntminh Mr & Ms Pac-Man

Atachi The Boy From Nowhere

kidofbaby Youtube Master Race

giâctzuhau Legend of Zelda

tmriddle Youtube Master Race

snakie31089 Donkey Kong

Atachi The Boy From Nowhere

DuyLinh The Warrior of Light Lão Làng GVN

antonntminh Mr & Ms Pac-Man

S.W.A.T The Warrior of Light

vaan009 The Warrior of Light

ItsmeAj snake, snake, snaaaake

aeon1994 Youtube Master Race

Chia sẻ trang này

Đăng nhập

biến game XBLA Demo thành Full

antonntminh Mr & Ms Pac-Man

No111 T.E.T.Я.I.S

Sonix ♫ VGM Collector ♫ Lão Làng GVN

No111 T.E.T.Я.I.S

ItsmeAj snake, snake, snaaaake

Holy_Master The Warrior of Light Lão Làng GVN

Atachi The Boy From Nowhere

antonntminh Mr & Ms Pac-Man

Atachi The Boy From Nowhere

kidofbaby Youtube Master Race

giâctzuhau Legend of Zelda

tmriddle Youtube Master Race

snakie31089 Donkey Kong

Atachi The Boy From Nowhere

DuyLinh The Warrior of Light Lão Làng GVN

antonntminh Mr & Ms Pac-Man

S.W.A.T The Warrior of Light

vaan009 The Warrior of Light

ItsmeAj snake, snake, snaaaake

aeon1994 Youtube Master Race

Chia sẻ trang này

Tìm kiếm hữu ích