auto conquer nè các bác

cái này bác nào giỏi tiếng anh thì dịch cho anh em cùng sài ="= em mù dở cái nì
Cheat Engine:
1. Once you've opened cheat engine. Click the button that's flashing top left.
2. Find conquer.exe in that list. Press ok.
3. Then check your coords on conquer. Type the left coord which is X and press first scan.
4. Then move your char to make the X change. Type the new X and press next scan, repeat that step until you have 3-2 addresses to choose from, if you have 3 addresses its the second one if you have 2 its the top one.

and repeat these steps for the Y address. But the Y address is just usually the X address + 4

HotKeys:
HP Pots - F1
MP Pots/Arrows - F2
XP Skill - F10

Important Notes:
To set a path tick the "Record Path" checkbox. The top box will be what the path filename will be saved as. The bottom box will be the file that is loaded so if you want to set paths and start that path right away make sure they are the same!

Set paths before you hit start bot.

To follow a path, Record Path needs to be ticked. (Filename only needs to be inserted into the bottom box.)

To set a path, press alt + s.
To clear all current paths press alt + c
To pause bot press alt + p
To resume press alt + r
To exit press alt + e

To pickup your own or public icons. Run the bot, press alt + t. Drop an item, hold mouse over item and in the pink item colour box on the gui, write down the colour hex. Do NOT include the 0x. And tick, "Pick up Custom"
còn đầy là hình ảnh auto
còn đây là link : http://www.mediafire.com/?gy02quydm277xdi

 

Tiếng Anh không à, mạn phép khóa